Abstract

With the gradual change in the design method of structures from resistance-based methods to performance-based methods, existing common building frames do not respond to the criteria of these methods, and if these frames are designed with new performance criteria, the design will be uneconomical. The basic problem of the existing types of frames is the imbalance between hardness and plasticity in them. A structure must have sufficient hardness in order not to be displaced in an earthquake, and it must have high ductility in order to dissipate the energy of the earthquake well. In this article, the purpose of the structure's performance in the combination of friction dampers and side-pleat joints in the steel structure of the bending frame is according to the constraints in solving the problem such as architectural, executive and design limitations and considering the uncertainties inherent in the system. This problem is solved in such a way that all three conditions are estimated, and for this purpose, three structures, 6, 10, 15 stories, have been modeled in three dimensions and have been analyzed under time history analysis. In examining the arrangement of dampers in the frames, the amount of energy in the 3x3 structures in the second frame is more than the first frame, which has increased by about 15%. But in 5x5 structures, the amount of energy when the frame damper is 3 is more than other frames. In these structures, when the damper is in the third frame, the energy of the structure has increased by about 10% compared to other states. Also, the effect of side plate connection in increasing the hardness is also important. that the above connection will reduce displacement by creating hardness at the connection point, and as a result, it will absorb more energy.